Table of Contents
Advertisement
y CHANNEL UP/DOWN SWITCHES [Y Y ]/[Z Z ]
➥ Push either switch to change the operating channel.
(pgs. 7–9)
➥ Checks tag channels or changes scanning direction dur-
ing scan.
(p. 13)
➥ Push either switch to change the setting during set
mode.
(p. 16)
u CHANNEL 16 SWITCH [16•C]
➥ Selects channel 16 when pushed.
➥ Selects the call channel when pushed for 1 sec.
➥ Enters call channel write mode when the call channel is
selected, and this switch is pushed for 3 sec.
i INTERNAL MICROPHONE
o SPEAKER-MICROPHONE CONNECTOR [SP MIC]
Connects the optional speaker-microphone.
!0 ANTENNA CONNECTOR
Connects the supplied antenna.
!1 DIAL/CHANNEL GROUP SWITCH [DIAL•I/U]
➥ Selects and changes the regular channels.
➥ Selects one of 2 regular channels in sequence when
pushed for 1 sec.
(p. 8)
• International and U.S.A. channels
are available for regular channels.
sions only)
(p. 7)
(p. 7)
(p. 11)
(p. 9)
(p. 22)
(p. 6)
(p. 8)
(UK and Itarian ver-
PANEL DESCRIPTION
!2 DUALWATCH/TRI-WATCH SWITCH [DW•TRI]
➥ Starts dualwatch when pushed momentarily.
➥ Starts tri-watch when pushed for 1 sec.
➥ Stops dualwatch/tri-watch when either is activated.
(p. 14)
➥ Enters comment writing condition when pushed while
pushing and holding [MONI].
!3 SCAN SWITCH [SCAN•TAG]
➥ Starts and stops normal or priority scan when tag chan-
nels are programmed.
(p. 13)
➥ Sets the displayed channel as a tag
when pushed for 1 sec.
➥ While turning power ON, clears all tag channels in the
selected regular channel group when pushed.
➥ Activates an optional voice scrambler function while
pushing [MONI].
(p. 10)
!4 TRANSMIT POWER/LOCK SWITCH [H/L•LOCK]
➥ Changes high and low power when pushed.
• Some channels are set to low power only.
➥ While pushing [MONI], push this key to select extra low
power.
(p. 9: Not available for some versions)
➥ Changes the lock function ON and OFF when pushed
for 1 sec.
(p. 8)
!5 6 INTERNAL SPEAKER
(p. 14)
(p. 14)
(p. 15)
channel
(scanned)
(p. 13)
(p. 13)
(p. 9)
2
3
Advertisement
Table of Contents
