I Call Channel Programming - Icom IC-M31 Instruction Manual

4
BASIC OPERATION

I Call channel programming

The call channel key is used to select the default channel,
however, you can program your most often-used channel in
each channel group for quick recall.
q Push [DIAL] for 1 sec. several
times to select the desired chan-
nel group (INT, USA, ATIS) to be
programmed.
w Push [16
] for 1 sec. to select the
•C
call channel.
• "CALL" and call channel number ap-
pear.
e Push [16
] again for 3 sec. (until
•C
a long beep changes to 2 short
beeps) to enter call channel pro-
gramming condition.
• Call channel number to be pro-
grammed flashes.
r Push [Y]/[Z] to select the desired
channel.
11
t Push [16
] to program the dis-
•C
played channel as the call chan-
nel.
• The call channel number stop flash-
ing.