Table of Contents
Advertisement
WWW.FOSCAM.COM
2)
Plug an earphone or a speaker in the computer; you can hear beep sound when the light
turns red.
3)
The camera will record automatically about one minute when motion trigger. You can
find the recording file in the folder which you set to store alarm record. (Figure 3.3)
4)
Send mails when motion trigger.
If you want to receive images when motion trigger. You need set Mail Service Settings first.
(Figure 3.18) Then set motion alarm as follows:
If you want the camera send mails in a special time range, not all the time when motion trigger,
but only during the time you set. You can choose Scheduler and set time range for motion alarm.
(Figure 3.28)
5)
Upload images via FTP server when motion trigger.
If you want upload images to FTP server when motion trigger. You need set FTP Service
Settings first. (Figure 3.20/3.21) Then set motion alarm as below picture.
There are two ways to alarm.
1) Alarm at any time when motion trigger.
Don't choose Scheduler. The camera will alarm at any time when motion trigger.
2) Plan to alarm.
If you want the camera alarm during the time you set. You need choose Scheduler and set time
range. (Figure 3.28)
Click left button on the box of time range. It will turn blue. If you want delete it, just click left button
on it again. It will turn to gray.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Figure 3.26
Figure 3.27
FI8918/FI8918W User Manual
31
Advertisement
Table of Contents
