Table of Contents
Advertisement
WWW.FOSCAM.COM
FTP server: If your FTP server is set up in LAN, you can set as Figure 3.20
If you have a FTP server which you can access in internet, you can set as Figure 3.21
FTP Port: Usually the port is 21
FTP Upload Folder: Make sure that the folder you plan to store images exists. For camera
couldn't create the folder itself. Also, the folder must be erasable.
FTP Mode: It supports standard (POST) mode and passive (PASV) mode
Upload Image Now: It will upload images when you choose the checkbox. Here Upload
Interval refers to the time between the current image and the next image.
Click Submit after these settings. Then click Test. You will see the following picture.
If it prompts error information as follows.
1) Can not connect to the server. Please check FTP Server is correct or not.
2) Network Error. Please try later.
3) Server Error.
4) Incorrect user or password. Please check the username and password is correct or not.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Figure 3.21
Figure 3.22
FI8918/FI8918W User Manual
29
Advertisement
Table of Contents
