Foscam FI8918 User Manual page 10

WWW.FOSCAM.COM
Obtain IP from DHCP server: If checked, the device will obtain IP from DHCP server. In other
words, the camera will have a dynamic IP. (Make sure the Router which the camera connects
has DHCP function and DHCP is enabled).
IP Address: Fill in the IP address assigned and make sure it is in the same subnet as your
computer or router. (I.e. the first three sections are the same)
Subnet Mask: The default subnet mask of the equipment in our LAN is: 255.255.255.0.You can
find the subnet mask in the basic information of your router or the locally-attached of your PC.
Gateway: Make sure it is in the same subnet with PC's IP address. Here gateway is your router's
LAN IP.
DNS Server: IP address of ISP network provider. You can find the DNS server in your router or
check the locally-attached of your computer. Locally-attached of PC contains your PC's IP
address, gateway and DNS server. Normally, there are two DNS servers. Here you can also set
the DNS server the same with gateway.
Http Port: LAN port assigned for the equipment usually is 80.You can set another port number,
such as port 8005, 85, 8100.etc.
User: Default administrator user name is admin
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Figure 2.4
Figure 2.5
FI8918/FI8918W User Manual
8