Making Detailed Settings (Manual Setup) - Denon AVR-3310 Owner's Manual

ENGLISH
Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup)
Check the Measuring Results and Equalizer Type after
Audyssey Auto Setup (Parameter Check)
This is displayed after Audyssey Auto Setup procedure is completed.
1
Press to select "Parameter Check", and then
i
press ENTER or .
p
2
Press to select the item you want to check, and then press
ui
Speaker Config. Check Distance Check
EQ Check
The measurement result of each speaker is displayed.
b When you selected "EQ Check", press
("Audyssey" or "Audyssey Flat").
When you want to check another item, press
b
If you set "Restore" to "Yes", you can return to Audyssey Auto Setup measurement result (value calculated
at the start by MultEQ) even when you have changed each setting manually.

Main remote control
operation buttons
ENTER
or
Channel Level Check Crossover Freq. Check
ui
to select the Correction curve you want to check
RETURN
.
:Displaying the menu
Cancel the menu
Making Detailed Settings
(Manual Setup)
For details on how to select, set and cancel settings for each menu, see "GUI Menu
Operation" (vpage 25).
Items that can be set with the Manual Setup procedure
n
Making the speaker settings (Speaker Setup) v page 33
Making the HDMI settings (HDMI Setup) v page 35
.
p
Making the audio settings (Audio Setup) v page 36
Making the network settings (Network Setup) v page 37
Making the Multi-zone settings (Zone Setup) v page 39
Making other settings (Option Setup) v page 40
OPTION
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
:Return to previous menu