Table of Contents
Advertisement
Setting items
GUI
Wall Paper : Set wallpaper to display the background when playback is
stopped, etc.
(Continued)
•
Picture : Set the background to a picture (DENON logo).
•
Black : Set the background to black.
Format : Set the video signal format to be output for the TV you are
using.
•
NTSC : Select NTSC output.
•
PAL : Select PAL output.
The "Format" can also be set by the following procedure. However,
the GUI screen is not displayed.
1. Press and hold the
seconds.
"Video Format" appears on the display.
o p
2. Press
3. Press the
setting.
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text : Display the content of operation during switching of surround mode,
input mode, etc.
•
ON : Turn display on.
•
OFF : Turn display off.
Master Volume : Master volume display during adjustment.
•
Bottom : Display at the bottom.
•
Top : Display at the top.
•
OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
NET/USB : Set the NET/USB screen display time when the input source
is "NET/USB".
•
Always : Show display continuously.
•
30s : Show display for 30 seconds after operation.
•
10s : Show display for 10 seconds after operation.
•
OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is "iPod".
•
Always : Show display continuously.
•
30s : Show display for 30 seconds after operation.
•
10s : Show display for 10 seconds after operation.
•
OFF : Turn display off.
Main remote control
operation buttons
Setting contents
<AUDIO DELAY>
<RETURN>
and
for at least 3
and set the video signal format.
<ENTER>
<MENU>
<RETURN>
,
or
to complete the
:Displaying the menu
:Moves the cursor
Cancel the menu
(Up/Down/Left/Right)
Setting items
GUI
Tuner : Set the tuner screen display time when the input source is
"TUNER".
(Continued)
•
Always : Show display continuously.
•
30s : Show display for 30 seconds after operation.
•
10s : Show display for 10 seconds after operation.
•
OFF : Turn display off.
Quick Select Name
1. Use
ui
to select the name of the Quick Select setting you want to
Change the "Quick Select"
change, then press
display title to one you
2. Use
o p
to set the cursor to the character you want to change.
prefer.
3. Use
ui
to change the character, then press
•
Up to 16 characters can be input.
•
You can change the character type when you press
character input.
•
The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜
GNumbersH 0123456789
4. Repeat steps 1 ~ 3 to change the display name.
Zone Rename
1. Use
ui
to select the zone name (MAIN ZONE, ZONE2 or ZONE3) you
Change the display title of
want to change, then press
each zone to one you prefer.
2. Use
o p
to set the cursor to the character you want to change.
3. Use
ui
to change the character, then press
•
Up to 10 characters can be input.
•
You can change the character type when you press
character input.
•
The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜
GNumbersH 0123456789
4. Repeat steps 1 ~ 3 to change the display name.
:Confirm the setting
Making Detailed Settings (Manual Setup)
Setting contents
ENTER
p
or
.
ENTER.
[SEARCH]
(Space)
ENTER
p
or
.
ENTER
.
[SEARCH]
(Space)
See overleaf
:Return to previous menu
ENGLISH
during
during
Hide quick links:
Advertisement
Table of Contents
