ENGLISH
Making Detailed Settings (Manual Setup)
Setting items
Channel
Stereo : Select stereo output.
Set the signal output from
Mono : Select mono output.
multi-zone.
When "Amp Assign" (vpage 33) is set to "ZONE2/3-MONO", the
"Channel" setting is automatically set to "Mono".
Volume Display
Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB.
Absolute : Display in the range 0 (Min) ~ 99.
Set
how
volume
is
displayed.
•
The "Volume Display" setting is applied also to the "Volume Level",
"Volume Limit" and "Power On Level" display method.
•
The "Volume Display" setting applies to all zones.
Volume Level
Variable : Volume adjustment enabled by main unit and remote
Set the volume output level.
controller.
–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
amp.
0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
amp.
When "Amp Assign" (vpage 33) is set to "ZONE2", "ZONE3" or
"ZONE2/3-MONO", the "Volume Level" setting is automatically set
to "Variable".
Volume Limit
OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
Make a setting for maximum
volume.
Can be set when the multi-zone "Volume Level" setting (vpage 40)
is "Variable".
Power On Level
Last : Use the memorized setting from the last session.
– – – (0) : Always use the muting on condition when power is turned on.
Define the volume setting
–80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
that is active when the
power is turned on.
Can be set when the multi-zone "Volume Level" setting (vpage 40)
is "Variable".
Mute Level
Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
Set the amount of attenuation
–20dB : The sound is attenuated by 20 dB down.
when muting is on.
0
Main remote control
operation buttons
Setting contents
:Displaying the menu
:Moves the cursor
Cancel the menu
(Up/Down/Left/Right)
Making Other Settings (Option Setup)
OPTION
Setting items
Volume Control
Volume Display : Set how volume is displayed.
•
Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB.
Set the MAIN ZONE volume
setting.
•
Absolute : Display in the range 0 (Min) ~ 99.
•
The "Volume Display" setting is applied also to the "Volume Limit" and
"Power On Level" display method.
•
The "Volume Display" setting applies to all zones.
Volume Limit : Make a setting for maximum volume
•
OFF : Do not set a maximum volume.
•
–20dB (61) / –10dB (71) / 0dB (81)
Power On Level : Define the volume setting that is active when the
power is turned on.
•
Last : Use the memorized setting from the last session.
•
– – – (0) : Always use the muting on condition when power is turned
on.
•
–80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
•
Full : The sound is muted entirely.
•
–40dB : The sound is attenuated by 40 dB down.
•
–20dB : The sound is attenuated by 20 dB down.
Source Delete
PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX / NET/
USB / TUNER : Select input source that is not used.
Remove
input
sources
•
ON : Use this source.
that are not used from the
•
Delete : Do not use this source.
display.
NOTE
•
Input sources being used in the various zones cannot be deleted.
•
Input sources set to "Delete" cannot be selected using
SELECT
.
GUI
Screensaver : Make screensaver settings.
•
ON : The screen saver is activated during GUI menu display or NET/USB
Make GUI related settings.
/ iPod / TUNER screen display if no operation is performed approximately
for a continuous 3-minute period. When you press
saver is cancelled and the screen before that screen saver started is
displayed.
•
OFF : Screen saver is not activated.
:Confirm the setting
Default settings are underlined.
Setting contents
SOURCE
uio p
, the screen
:Return to previous menu