Denon AVR-3310 Owner's Manual page 39

Setting items
Crossover Frequency 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
250Hz : Set the crossover frequency.
Outputs at below set
frequency, each speaker's
Advanced : Specify crossover frequency for each speaker.
bass signal output from
• Front / Center / Surround / Surround Back / Front Height : Select the
the subwoofer. Set this
speaker.
according to the low
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz /150Hz / 200Hz /
frequency reproduction
250Hz : Set the crossover frequency.
capabilities of the speakers
you are using.
• Can be set when the "Speaker Configuration" – "Subwoofer" (vpage
33) setting is "Yes", or when you have a speaker that is set to "Small".
• Always set the crossover frequency to "80 Hz". When using small
speakers, however, we recommend setting the crossover frequency to
a higher frequency.
• For speakers set to "Small", sound below the crossover frequency is cut
from the sound output. The cut bass sound is output from the subwoofer
or front speakers.
• The speakers that can be set when "Advanced" is selected differ
according to the "Subwoofer Mode" setting (vpage 34).
• When "LFE" is selected, speakers set to "Small" at "Speaker
Configuration" can be set. If the speakers are set to "Large", "Full
Band" is displayed and the setting cannot be made.
• If set to "LFE+Main", this setting can be made regardless of the
speaker size.
Front Speaker Setup Setting : Choose the method for setting the front speakers.
Normal : The front speakers are set using the
Set the front speakers to use •
• Custom : The front speakers used for the different playing modes are
for every surround mode.
set in advance.
2CH DIRECT/STEREO : The front speakers used in the direct, stereo and
pure direct play modes (2 channel) are set in advance.
• A : Front speaker A is used.
• B : Front speaker B is used.
• A+B : Both front speakers A and B are used.
MULTI CH : The front speakers used in modes other than the direct, ste-
reo and pure direct play modes (2 channel) are set in advance.
• A : Front speaker A is used.
• B : Front speaker B is used.
• A+B : Both front speakers A and B are used.
NOTE
• When set to "Custom",
• The front speaker setting stored for the "Quick Select" function is given
priority.
Main remote control
operation buttons
Setting contents
<FRONT SPEAKERS>
<FRONT SPEAKERS>
does not operate.
:Displaying the menu :Moves the cursor
Cancel the menu (Up/Down/Left/Right)
Making the HDMI Settings (HDMI Setup)
Make settings for HDMI video/audio output.
Setting items
RGB Range Normal : Output with RGB video range (16 (black) to 235 (white)).
Enhanced : Output with RGB video range (0 (black) to 255 (white)).
Set the video range of RGB
output from the HDMI
This setting is valid when using a TV equipped with a DVI terminal.
terminal.
Auto Lip Sync ON : Compensated.
OFF : Not compensated.
Automatic compensation
for timing shift in audio and
video output.
Audio Out AMP : Playback through speakers connected to the receiver.
TV : Playback through TV connected to the receiver.
Select HDMI audio output
device.
When the HDMI control function is operating, the setting of audio
playback in the connected TV takes priority (vpage 75 "HDMI
Control Function").
HDMI Control ON : Use the HDMI control function.
OFF : Do not use the HDMI control function.
External devices can be con-
trolled from the AVR-3310
and the AVR-3310 can be
• Please consult the operating instructions for each connected device to
controlled from external de-
check the settings.
vices.
• For details on the HDMI control function, see "HDMI Control Function"
NOTE (vpage 75).
.
The HDMI control function
NOTE
controls operations of a
• When "HDMI Control" is set to "ON", it consumes more standby
TV that is compatible with
power.
the HDMI control function.
• When not using this unit for a long period, we recommend that you
Make sure that the TV and
press
HDMI are connected when
• When the "HDMI Control" setting has been changed, always turn off
you perform HDMI control.
the power to the connecting devices afterwards and then turn back on.
• The "HDMI Control" does not work when the power to the equipment
is off.
• When "HDMI Control" is set to "ON", power is supplied constantly to
the AC outlet (UNSWITCHED).
Standby Source
Last : Standby with last used input source during power on.
HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 : The standby mode is set at
Set the HDMI connector for
the input source assigned to the respective.
HDMI signal input during
standby.
This can be set when "HDMI Control" is set to "ON".
:Confirm the setting
Making Detailed Settings (Manual Setup)
Default settings are underlined.
Setting contents
<POWER>
to turn off (jOFF) the power.
:Return to previous menu
ENGLISH
See overleaf