Phonak ZoomLink+ User Manual page 16

Using ZoomLink+
How to use ZoomLink+:
J Place it on the table. If you use the Zoom setting, the front
of ZoomLink+, where the lavalier is attached, should point to
the speakers that you want to hear. If you use the omni-setting,
the orientation of ZoomLink+ has no influence, as sound is
picked up from all angles.
J Make sure the lavalier is not folded together or knotted.
J Switch ON ZoomLink+ by holding down one of its 3 micro-
phone buttons.
Recommended ZoomLink+ settings:
16
Zoom (wide-angle sound pickup)
Omni (360° sound pickup),
to be used in low background noise