For Professionals: Changing The Fm Channel - Phonak ZoomLink+ User Manual

For professionals
Changing the FM channel
If the radio channel used in ZoomLink+ is frequently disturbed
by an external source of interference, the hearing care professional
can switch ZoomLink+ to another radio channel.
1) Switch ON ZoomLink+ by pressing the button for one second.
2) Using a pen, press the push button, as pictured. After one
second, the channel displayed in the LCD will change. Hold
the button down until the desired channel is displayed.
3) Release the button. The channel number in the LCD will stop
blinking after a few seconds.
4) Set the default channel of
the MyLink or MicroLink
receivers to the same channel
by using the FM SuccessWare.
31