Zoomlink+ Connecting To A Gps In The Car - Phonak ZoomLink+ User Manual

Using ZoomLink+
Connecting to a GPS in the car
While a TV set provides a constant audio signal, GPS devices
only send out audio information every few seconds or minutes.
ZoomLink+'s permanent audio input setting has been developed
with exactly these products in mind.
To activate the permanent
audio input:
J Switch ON ZoomLink+
by holding down one of
its 3 microphone buttons
for 2 seconds.
J Attach the adapter for
external connections to
the ZoomLink+.
J Connect one end of the audio cable to the ZoomLink+'s
adapter for external connections interface, and the other to
the audio output socket of the GPS.
J Switch ON the GPS.
If you leave the car, proceed as follows:
J Remove the audio cable and the adapter for external connections
from the ZoomLink+.
J If you do not need the ZoomLink+: switch OFF ZoomLink+.
If you want to continue using ZoomLink+: hold down the
Zoom or SuperZoom button for one second. This will switch OFF
the GPS mode and activate the microphones in ZoomLink+.
24