Marking And Labeling Symbols - Kodak RVG User Manual

Directive 93/42/CEE Concerning Medical Devices
1–2 Compliance and Safety
Directive 93/42/CEE
Concerning Medical
Devices
The sensor belongs to class I of the Directive
Concerning Medical Devices. The sensor is an active
device that temporarily penetrates the body through a
body orifice for diagnostic purposes. The applicable
European standards are the General requirements
for Safety (IEC/EN 60601-1 and collaterals) and
Electromagnetic Compatibility (EN 60601-1-2).
Marking and Labeling
Symbols
Table 1–1 describes the applicable marking and
labeling symbols.
Table 1–1

Marking and Labeling Symbols

Label
Type BF Device
The sensor is a Type BF device.
WEEE Symbol
In the European Union, this symbol indicates
that when the last user discards this product,
it must be sent to appropriate facilities for
recovery and recycling. Contact your
local Kodak representative or refer to
www.kodak.com/go/recycle for additional
information on the collection and recovery
programs available for this product.
Description