Advertisement
Quick Links
H2 Hummer Spare Tire Carrier Mounting Instructions
Tools Required for Installation:
Socket Wrench
19 MM socket
15 MM socket
7/16" Wrench
Torque Wrench
Drill
7/16" Drill Bit
Center Punch
Hammer
Phillips Head Screwdriver
1/8" Allen Wrench
Before beginning installation, check to make sure all components listed above are included in packaging.
4711 H2 Spare Tire Ca#116FA.doc
Package Contents:
Swing arm Assembly
Hinge Plate
Striker Plate
License Plate Bracket
Fastener Hardware Bag (Includes):
M12 X 70 MM Flange head bolts X 4
10-32 X 3/8" Button head bolts X 2
Wire Tie X 3
Thick Grommet
Thin Grommet
3/8"-24 X _" Hex Bolt & 2" Fender Washer
License Plate Fastener Bag
Jack Support Bracket (Back Page)
Jack Bracket Vibration Dampener
Interior Panel Plug
End Caps (2"X 4") X 2
Advertisement
Related Manuals for HUSKY LINERS 47111
Summary of Contents for HUSKY LINERS 47111
- Page 1 4711 H2 Spare Tire Ca#116FA.doc H2 Hummer Spare Tire Carrier Mounting Instructions Tools Required for Installation: Package Contents: Socket Wrench Swing arm Assembly 19 MM socket Hinge Plate 15 MM socket Striker Plate 7/16” Wrench License Plate Bracket Torque Wrench Fastener Hardware Bag (Includes): Drill M12 X 70 MM Flange head bolts X 4...
- Page 2 4711 H2 Spare Tire Ca#116FA.doc H2 Hummer Spare Tire Carrier Mounting Instructions 1. Remove both tow loops from rear bumper with 18 MM socket. 2. Remove hinge plate from packaged swing arm assembly. To aid in positioning and support of hinge plate during installation, insert one M12 X 70MM bolt into a driver’s side tow hook mounting hole.
- Page 3 4711 H2 Spare Tire Ca#116FA.doc NOTE: Your Hummer H2 tire carrier is manufactured using the highest quality materials. The hinge pin is stainless steel and the bushings are oil-impregnated bronze. Lubrication should not be required. We have included a grease fitting for supplemental lubrication if deemed necessary. License Plate Light Wiring Instructions 1.
- Page 4 4711 H2 Spare Tire Ca#116FA.doc Jack Support Bracket Once you have removed the inside spare tire carrier, you will need to use the included Jack Support Bracket to support the top of your jack. To install the bracket, you will need to use the factory bolts and spacer for correct alignment.
Need help?
Do you have a question about the 47111 and is the answer not in the manual?
Questions and answers