HUSKY LINERS 7391 Care And Use Instructions

THANK YOU FOR SELECTING A HUSKY FLOOR LINER
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
Armor All , Son-of-a-Gun
INSTALLATION INSTRUCTIONS FOR YOUR THIRD
SEAT FORD EXCURSION FLOOR LINERS
EXCURSION OWNERS WITHOUT SECOND ROW CAPTAIN'S CHAIRS WILL NEED TO TRIM AWAY THE AREA
SHOWN DARKENED BELOW. A TRIM GROOVE IS MOLDED IN TO USE AS A GUIDE. THE "TONGUE" SHOWN
TRIMMED CAN ALSO BE REMOVED OR TUCKED UNDER THE SECOND ROW BENCH SEAT. TRIMMING
PHOTOS ARE INCLUDED ON THE BACK OF THIS PAGE.
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
®
or similar items is discouraged as these products make the liner slick.
*TO AID INSTALLATION, SLIDE THE SECOND
SEATS TO THEIR MOST FORWARD POSITION.
FRONT OF VEHICLE
® ®
or Glass Plus work well. Use of
7391.doc
Rev: 0
03/22/02