Nortel 1120E User Manual page 3

Call Forwarding:
1120E
Press the Forwrd key (to the upper left of
the phone's screen; if it is not displaying,
use the Up or Down Navigation Key
until it is). An icon of a phone will blink
on the screen. Enter the five digit BC
telephone number to which you want to
forward your calls, then press the Forwrd
key again (the phone icon will be solid
indicating that Call Forwarding is active).
To cancel call forwarding, press the
Forwrd key (the phone icon will disappear
indicating that Call Forwarding is
inactive).
Call Transfer:
1120E
While on an active call, press the Trnsfr
key (to the left of the phone's screen; if it
is not displaying, use the Up or Down
Navigation Key until it is), dial the B.C.
telephone number to which you wish to
transfer the call, press the Trnsfr key
again, and hang-up the handset.
Conference Call:
1120E
While on an active call, press the Conf 6
key (to the upper right of the phone's
screen; if it is not displaying, use the Up
or Down Navigation Key until it is),
which will place the first party on hold and
give you dial tone, then dial the telephone
number that you wish to add to the call.
Once that party is connected, press the
Conf 6 key again. There should now be
three parties on the call. Repeat this
process to add up to 5 other parties on
the line. When finished with the call, hang
up the handset.
Back To Top
Nortel VoIP Phone User Guide
Boston College
1140E
Press the Forwrd Function Key (just
below the phone's screen). An icon of a
phone will blink on the screen. Enter the
five digit BC telephone number to which
you want to forward your calls, then press
the Forwrd Function Key again (the
phone icon will be solid indicating that
Call Forwarding is active).
To cancel call forwarding, press the
Forwrd Function Key (the phone icon will
disappear indicating that Call Forwarding
is inactive).
1140E
While on an active call, press the Trnsfr
Function Key (just below the phone's
screen), dial the B.C. telephone number to
which you wish to transfer the call, press
the Trnsfr key again, and hang-up the
handset.
1140E
While on an active call, press the Conf 6
Function Key (just below the phone's
screen), which will place the first party on
hold and give you dial tone, then dial the
telephone number that you wish to add to
the call. Once that party is connected,
press the Conf 6 key again. There should
now be three parties on the call. Repeat
this process to add up to 5 other parties on
the line. When finished with the call, hang
up the handset.
3