Component Video Connections - CyberHome CH-DVD 402/S Owner's Manual

Component Video Connections

3
Connecting to a TV with Component Video Inputs
In order to enjoy the highest Video Quality available from your DVD Player, you must use a TV equipped with
Component Video Inputs. If your TV supports Component Video, it's recommended that you use this connection.
Component Video separates the Video Signal into three separate "components" (Y-Cb-Cr), resulting in a higher quality
picture than S-Video or Standard Composite Video. *You must purchase a set of three (3) Component Video Cables
for this connection (not included).
In order to activate the COMPONENT VIDEO Output, you must first connect the
unit using the COMPOSITE Video Output as described in Section 1.
Enter the SETUP Menu and change the VIDEO OUTPUT setting to YCbCr (See
Page 31). *For Help on using the SETUP MENU, see Page 28.
Now that the COMPONENT Outputs are Active, connect the COMPONENT
VIDEO Outputs from the DVD Player to the inputs on your TV and disconnect
the COMPOSITE Cable.
Select the Video Input Channel on your TV that corresponds to the
COMPONENT Video Inputs. On some models, this may be called "Input 3" or
"Video 3". You should now see the DVD Player's splash screen on your TV.
DVD
ANALOG OUT
R
L
AUDIO AUDIO
Digital Audio Connection
4
Using the CoAxial Digital Audio Output Connection
Your DVD Player features a Digital Audio Output to provide the ultimate in realism for your Home Theater experience.
Use this option to get the most out of discs recorded with Dolby 5.1 Digital Surround Sound or Digital Theater System
(DTS) by sending the encoded, or "RAW" digital audio signal to your Receiver for decoding. You must be using a
Digital Receiver with 5.1 Channel Decoding and a CoAxial Digital Input to take advantage of this feature.
You must purchase a separate Coaxial Digital Audio Cable for these connections, as these cables are not included
with the DVD Player.
Connect the Coaxial Digital Audio Out of the DVD Player to the corresponding Input of your Receiver.
Adjust your Receiver's Input Source Setting to the correspond with the Digital Audio In.
Y
DIGITAL OUT
Cb
VIDEO
COAXIAL
OUT
Cr
S-VIDEO
OUT
COMPONENT
VIDEO VIDEO VIDEO VIDEO
AUDIO AUDIO
VIDEO
DVD
ANALOG OUT
DIGITAL OUT
VIDEO
COAXIAL
R
OUT
S-VIDEO
L
OUT
AUDIO AUDIO VIDEO VIDEO VIDEO VIDEO
AUDIO AUDIO
COMPONENT VIDEO IN
GREEN OR YELLOW
BLUE
RED
Y
COAXIAL DIGITAL
AUDIO IN
Cb
Cr
COMPONENT
VIDEO
14
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
SHARPNESS
BRIGHTNESS
CONTRAST
VIDEO OUTPUT
MAIN PAGE
Enter Setup
TV
Y
Cb
Cr
RECEIVER
YCbCr
S_VIDEO