Make Calls; Voice Calls - Nokia N Series User Manual

Make calls

Voice calls

1 In the standby mode, enter the phone number, including
the area code. To remove a number, press
For international calls, press
(replaces the international access code), and enter the
country code, area code (omit the leading zero if
necessary), and phone number.
2 Press to call the number.
3 Press to end the call (or to cancel the call attempt).
Pressing always ends a call, even if another application
is active. Closing the slide does not end an active voice call.
To adjust the volume during a call, use the volume key on
the side of your device. You can also use the scroll key. If
you have set the volume to Mute, select
To make a call from Contacts, press
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press
You must copy the contacts from your SIM card to
before you can make a call this way. See "Copy contacts,"
p. 102.
92
.
twice for the + character
Unmute first.
, and select
.
Contacts
To call a recently dialed number in the standby mode,
press . Scroll to the number, and press
To send an image or a video clip in a multimedia message
to the other participant of the call, select
MMS (in UMTS networks only). You can edit the message
and change the recipient before sending. Press
the file to a compatible device (network service).
To put an active voice call on hold while answering another
incoming call, select Options
the active and the held call, select
connect the active and held calls and drop yourself from
the line, select Options > Transfer.
To send touch tone strings (for example, a password), select
Options > Send touch tones. Enter the touch tone string
or search for it in Contacts. To enter a wait character (w)
or a pause character (p), press
send the tone. You can add touch tones to the
or Touch tones fields in a contact card.
Tip! When you have only one active voice call, to put
the call on hold, press
again.
During an active call, to route the sound from the handset to
the loudspeaker, select Options
.
Options > Send
to send
> Hold. To switch between
Options > Swap. To
repeatedly. Select OK to
Phone number
. To activate the call, press
> Activate loudspeaker.