Nokia N Series User Manual page 128

Q: How can I end the data connection when the device starts
a data connection again and again?
A: To stop the device from making a data connection, press
and select Messaging > Options
message > Multimedia retrieval
Manual—to have the multimedia messaging center save
messages to be retrieved later. You receive a notification
when there is a new multimedia message that you can
retrieve in the multimedia message center.
Off—to ignore all incoming multimedia messages. After this
change, the device does not make any network connections
related to multimedia messaging.
PC connectivity
Q: Why do I have problems in connecting the device to my PC?
A: Make sure that Nokia Nseries PC Suite is installed and running
on your PC. See the user guide for Nokia Nseries PC Suite
on the CD-ROM or DVD-ROM. For further information on
how to use Nokia Nseries PC Suite, see the help function
on Nokia Nseries PC Suite or visit the support pages at
www.nokiausa.com.
Q: Can I use my device as a fax modem with a compatible PC?
A: You cannot use your device as a fax modem. However, with
call forwarding (network service), you can forward incoming
fax calls to another phone number.
,
> Settings > Multimedia
and one of the following:
Wireless LAN
Q: Why can't I see a wireless LAN (WLAN) access point even
though I know I'm within its range?
A: The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use a
hidden SSID if you know the correct SSID, and have created
a WLAN Internet access point for the network on your
Nokia device.
Q: How do I switch wireless LAN (WLAN) off on my Nokia device?
A: The WLAN on your Nokia device will switch off when you
are not trying to connect, or are not connected to another
access point, or scanning for available networks. To further
reduce battery consumption, you can specify that your Nokia
device does not scan, or scans less often, for available
networks in the background. WLAN will switch off in between
background scans.
To change the background scan settings:
1 Press , and select Tools
Wireless LAN.
2 Change the value of Show WLAN availability
stop background scans, or increase the background scan
time interval in Scan for
3 To save your changes, press Back.
When Scan for networks is set to Never, the WLAN availability
icon will not be shown in the standby mode. However, you can
still manually scan for available WLAN networks, and connect
to WLAN networks as usual.
> Settings > Connection >
to Never
networks.
to
127