3-D Tones - Nokia N Series User Manual

In the tones list, the Download sounds
opens a list of bookmarks. You can select a bookmark and
start connection to a web page to download more tones.
If you want the caller's name to be spoken when your device
rings, select Options > Customize, and set
name to On. The caller's name must be saved in Contacts.
To create a new profile, select
Offline profile
The Offline profile lets you use the device without connecting
to the wireless network. When you activate the
profile, the connection to the wireless network is turned
off, as indicated by in the signal strength indicator
area. All wireless RF signals to and from the device are
prevented. If you try to send messages, they are placed in
the outbox to be sent later.
When the Offline profile is active, you can use your device
without a (U)SIM card.
Important: In the offline profile you cannot make or
receive any calls, or use other features that require
cellular network coverage. Calls may still be possible
to the official emergency number programmed into
your device. To make calls, you must first activate
the phone function by changing profiles. If the device
has been locked, enter the lock code.
link (network service)
Say caller's
Options > Create new.
Offline
When you have activated the
use the wireless LAN, for example, to read your e-mail or
browse on the internet. Remember to comply with any
applicable safety requirements when establishing and
using a wireless LAN connection. See "Wireless LAN‚" p. 25.
You can also use Bluetooth connectivity while in the
Offline profile. See "Bluetooth connectivity‚" p. 27.
To leave the Offline profile, press the power key, and select
another profile. The device re-enables wireless transmissions
(providing there is sufficient signal strength).

3-D tones

Press , and select Tools >
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select
On. To change the ringing tone, select
the desired ringing tone.
To change the 3–D effect that is applied to the ringing tone,
select Sound trajectory and the desired effect. To modify
the effect, select from the following settings:
Trajectory speed—Scroll left or right to adjust the speed
at which sound moves from one direction to another.
This setting is not available for all ringing tones.
Reverberation—Select the type of echo.
Offline profile, you can still
3-D tones. With 3-D tones
3-D ringing tone effects
Ringing tone and
>
77