Messaging; Write Text - Nokia N Series User Manual

Messaging

Press , and select
Only devices that have compatible features can receive
and display multimedia messages. The appearance of a
message may vary depending on the receiving device.
To create a new message, select
Messaging contains the following folders:
Inbox—Received messages, except e-mail and cell
broadcast messages, are stored here. E-mail messages
are stored in the Mailbox.
My folders—Organize your messages into folders.
Tip! To avoid rewriting messages that you send
often, use texts in the templates folder. You can
also create and save your own templates.
Mailbox—Connect to your remote mailbox to
retrieve your new e-mail messages or view your
previously retrieved e-mail messages offline.
See "E-mail," p. 89.
Drafts—Draft messages that have not been sent are
stored here.
Sent—The last messages that have been sent, excluding
messages sent using Bluetooth connectivity or
infrared, are stored here. To change the number of
messages to be saved, see "Other settings," p. 91.
82
Messaging (network service).
New message.
Outbox—Messages waiting to be sent are temporarily
stored in the outbox, for example, when your device
is outside network coverage.
Reports—You can request the network to send you a
delivery report of the text messages and multimedia
messages you have sent (network service).
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select
command in the main view of Messaging.
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions, from your service provider. For available topics and
relevant topic numbers, contact your service provider. In the
main view of Messaging, select
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.

Write text

ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.
Options > Service
Options > Cell broadcast.