Nokia N Series User Manual page 123

N series
Hide thumbs Also See for N Series:
Table of Contents

Advertisement

Available languages

Available languages

In an ad-hoc network, all devices must use the same
WLAN network
name.
WLAN security
mode—Select the encryption used: WEP,
802.1x
(not for ad hoc networks), or WPA/WPA2. If you
select
Open
network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the network
supports them.
WLAN security
settings—Enter the settings for the selected
security mode:
Security settings for WEP:
Wep key in
use—Select the WEP key number. You can
create up to four WEP keys. The same settings must be
entered on the wireless LAN access point device.
Authentication
authentication type between your device and the wireless
LAN access point device.
WEP key
settings—Enter
the key),
WEP key format (ASCII
WEP key
(the WEP key data in the selected format).
Security settings for
WPA/WPA2—Select the means of authentication:
use an extensible authentication protocol (EAP) plug-in,
or
Pre-shared key
appropriate settings:
122
type—Select
Open
or
Shared
WEP encryption
or Hexadecimal), and
802.1x
and WPA/WPA2:
to use a password. Complete the
EAP plug-in settings
as your service provider instructs.
Pre-shared key
password. The same password must be entered on the
wireless LAN access point device.
WPA2 only mode
whether Temporal Key Integrity Protocol (TKIP) is used.
Homepage—Define a home page.
Select
Options
IPv4
settings:
device),
Subnet mask
gateway
(the gateway), and
addresses of the primary and secondary DNS server.
for the
Contact your internet service provider for these addresses.
IPv6 settings
Well-known, or
(length of
Ad-hoc channel
number (1-11) manually, select
Proxy server
Proxy port
number—Enter the proxy port number.
EAP
to
(only for EAP)—Enter the settings
(only for
Pre-shared
(only for WPA/WPA2)—Select
>
Advanced settings
and from the following:
Phone IP address
(the IP address of your
(the subnet IP address),
DNS
address. Enter the IP
>
DNS
address—Select Automatic,
User
defined.
(only for Ad-hoc)—To enter a channel
User
defined.
address—Enter the address for the proxy server.
key)—Enter a
Default

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

N95

Table of Contents