Set Time/Date; Set Tone/Pulse - VTech CD1261 User Manual

Telephone settings

Set time/date

If you subscribe to caller ID service, the time and date are set automatically with
each incoming call.
To set the time and date manually:
Press OPTIONS repeatedly until the screen displays
1.
SET TIME/DATE.
Press CALL LIST
2.
hour format) for the hour. Press DISPLAY DIAL to move on to set
the minute.
When the minute is flashing, use CALL LIST
3.
through the list of numbers from 00 to 59 to select the appropriate number
for the minute. Press DISPLAY DIAL to move on to set the month.
When the month is flashing, use CALL LIST
4.
the list of numbers from 1 to 12 to select the appropriate number for the month.
Press DISPLAY DIAL to move on to set the date.
When the date is flashing, use CALL LIST
5.
the list of numbers from 1 to 31 to select the appropriate number for the date.
Press DISPLAY DIAL to return to step 2 above to make any corrections.
Press OPTIONS to save your setting and advance to the next feature setup.
6.
If you press and hold CALL LIST
the digits will scroll through automatically.

Set tone/pulse

This telephone comes factory set for touch tone dialing. If
you do not have touch-tone dialing service, you need to
change the dialing mode to pulse dialing.
Press OPTIONS repeatedly until the screen displays
1.
SET TONE/PULSE.
Press CALL LIST
2.
or PULSE.
Press OPTIONS to save your selection and return to idle mode.
3.
If you have pulse dial (rotary) service, you can temporarily switch to touch-tone
dialing during a call by pressing
After you hang up, the telephone automatically returns to pulse dialing mode.
or
CALL LIST
or CALL LIST
(see Temporary tone dialing on page 16).
14
to select the appropriate number (12
or
CALL LIST
or
CALL LIST
or
CALL LIST
or CALL LIST when you are programming,
to choose TONE
12:00 1/01
AM
SET TIME/DATE
to scroll
to scroll through
to scroll through
SET TONE/PULSE
TONE