Table of Contents
Advertisement
DESCRIPTION OF CONTROL PANEL
1 ON/Standby button (on/off)
2 MODE button (selects the modes): Air
conditioning, dehumidifying, air
purifying/fan, Smart.
3 Air conditioning symbol
4 Dehumidifying symbol
5 Air purifying/fan symbol
6 Smart symbol
7 Fan speed button: Low - Med - High -
Auto.
Note: The "SWING" button (15) moves the grille flaps to distribute the cool air uniformly in the
room. When the SWING button is pressed and the flaps have begun moving alternately for-
wards and backwards, pressing the button again will lock the flaps in their current position.
Pressing the button again will restart the flaps moving forwards and backwards.
When the appliance is turned off, they will close irrespective of their position.
OPERATING FROM THE CONTROL PANEL
The control panel enables you to manage all the main functions of
the appliance, but to fully exploit its potential, you must use the
remote control unit.
T
URNING THE APPLIANCE ON
• Plug into the mains socket.
Two lines appear on the display indicating that the appliance is
in standby (fig. 12).
• Press the
button until the appliance comes on. The last
function active when it was turned off will appear. When turned
on for the first time, the appliance will be in "air conditioning"
mode. Subsequently it will be in the same mode as when turned
off.
Never turn the air conditioner off by unplugging from the mains. Always press the
button, then wait for a few minutes before unplugging. This allows the appliance to per-
form a cycle of checks to verify operation.
14
5
6
15
4
2
3
9
10
13
11
8
12
8 Speed indicator
9 BOOST symbol
10 SLEEP symbol
11 Timer symbol
12 Ioniser symbol
13 Increase button (+)
14 Decrease button (-)
15 SWING button (movement of the grille
flaps)
8
1
7
12
Advertisement
Table of Contents
