Description Of The Control Panel; Replacing The Batteries - DeLonghi Pinguino T90 User Manual

GB-5751012500 14-04-2004

Description of the control panel

THE CONTROL PANEL
A ON/OFF button
B Mode selection button
Conditioning, BOOST (superconditioning), dehumidifying, fan.
C Air conditioning mode indicator light
D BOOST (superconditioning) mode indicator light
E Dehumidifying mode indicator light
F Fan mode indicator light (air purifying in model T100ECO)
G Increase temperature/humidity/ programmed operating time button
H Timer in operation indicator light
I Display displays the temperature/humidity values set and the programmed operating
time
L Timer button
M Temperature display
N Humidity display
O Reduce temperature/humidity/programmed operating time button
P/Q/R/S Fan speed and AUTO mode indicator lights
T Fan speed selection button
U "SWING" button to move grille flaps (model T100ECO only)
NB: The "SWING" button (U) moves the grille flaps to distribute the cool air uniformly in the room.
When the button (U) is pressed and the flaps have begun moving alternately forwards and
backwards, pressing the button again will lock the flaps in their current position.
Pressing the button again will restart the flaps moving forwards and backwards.
When the appliance is turned off, they will close irrespective of their position.
MODELS WITH REMOTE CONTROL UNIT (model T100ECO only)
Operation
- Pressing the ON/OFF button (
- Pressing the FAN button selects the required fan speed. Each time the FAN button is pressed,
the speed of the fan rotates through the available options (Max, Min, Silent, Auto). On the
control panel, the LED corresponding to the selected speed lights up.
- The SET buttons (+) and (-) increase or reduce temperature or humidity.
The temperature or humidity set is displayed on the control panel.
Each time the button is pressed, the appliance confirms the selection with a beep and the light
on the remote control unit comes on.
NB: The remote control unit can be used for the following functions only: to turn the appliance
on or off, vary fan speed and set temperature or humidity depending on the operating mode
selected on the control panel. (see pages 22-23)

Replacing the batteries

• Remove the cover on the back of the
remote control unit;
• replace the flat batteries with two AAA 1.5
V batteries, making sure they are in the
correct position (see instructions inside the
battery compartment);
• Replace the cover.
15:59 Pagina 21
) turns the appliance on or off.
Indicator light
FAN
FAN button
+
SET
SET - button
-
ON/OFF button
SET + button
21