I Position Request Call - Icom IC-M801GMDSS Instruction Manual

Mf/hf marine transceiver

Hide thumbs Also See for IC-M801GMDSS:

Table of Contents

CALL PROCEDURE

I Position request call

The position request call is used to conﬁrm the speci-

ﬁed ship's position. This calling system uses digital sig-

nals only, therefore a voice reply is not necessary.

DSC WATCH screen

DSC menu

Rotate

Address ID selection

Rotate

Manual setting

Rotate

Call frequency selection

Rotate

Confirmation screen

Push and hold

for 1 sec.

Start calling...

While waitng for the acknowledgement

When the acknowledgement call is received

✔ When no acknowledgement is received

q Wait for 5 min., then call again on the same or a

different frequency.

w If no acknowledgement is received after a 2nd

call, wait for at least 15 min. before repeating the

call.

Push and hold

for 1 sec.

TX memory

channel

See p. 23 for details.

≥

Table of Contents

Do you have a question about the IC-M801GMDSS and is the answer not in the manual?