I Received Information - Icom IC-M801GMDSS Instruction Manual

I Received information

When receiving a DSC call, the received format spec-
ifier and its contents are memorized into the received
call log. Distress calls (including other calls with a dis-
tress category) are stored separately from other calls.
q During DSC watch mode, push [RX
the received DSC memory select screen.
• Or, push [MODE ], rotate [CH] to select "
SET
w Rotate [CH] to select the desired category from
" " and "
• "
when a message have not been read is available in the
category.
• " " is displayed beside category when no
received message is stored in the category.
Ç
e Rotate [CH] to select the desired DSC message.
• " " means the DSC messages have not been read.
• " " stands for distress relay.
• Distress memory screen
Ç
• Others memory screen
Ç
r Push [ENT] to indicate the contents.
• Rotate [CH] to scroll text to see hidden lines informa-
tion.
] to enter
CLAR
" then push [ENT].
" then push [ENT].
" is displayed beside category
WHEN RECEIVING A CALL
Up to 20 distress and up to 20 other calls can be mem-
orized.
t Push [ENT] to selects the traffic screen and moni-
tor the traffic frequency.
y Push [RX
] to dispaly the DSC message
CLAR
under the traffic frequency indication.
• Rotate [CH] to scroll text to see hidden lines informa-
tion.
] to return to the indication as step t.
• Push [RX
CLAR
u Push [FREQ/CH] to return to DSC watch mode.
NOTE:
When the DSC message with " " symbol is se-
lected in step e, the message "
displayed at the bottom of the line in memory con-
tents screen in step r.
9
1
2
3
4
5
6
7
8
9
" is
10
11
12
13
14
15
16
17
29