Select And Start A Washing Programme - Electrolux ESL68040 User Manual

Select and start a washing programme

1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate.
2. Check that the water tap is opened.
3. Press the On/Off button.
4. Select the washing programme.
( See "Washing programmes chart" ).
5. If required, postpone the start time of
the washing programme.
6. Set, if required, the options.
7. Press the OK button and close the
door, the washing programme will
start automatically.
If the delay start has been set, the
countdown will start automatically.
Once the delay start has elapsed the
programme will start automatically.
The opening of the door will interrupt
the countdown. Close the door; the
countdown will continue from the
point at which it was interrupted.
Once the washing programme has
started, a point-shaped optical sig-
nal appears on the floor beneath the
dishwasher door.
This optical signal will remain illumi-
nated for all the duration of the
washing programme.
If the appliance has been installed
higher up with a furniture door
mounted flush, the optical signal will
be no longer visible.
select and start a washing programme electrolux 23
Interrupt or cancel a washing pro-
gramme in progress ONLY if it's
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Cancel a delay start or a washing
programme in progress
1. Open the dishwasher door.
2. Press simultaneously both Option
and OK buttons.
3. The message CONFIRM CAN-
CEL ? is displayed.
4. Press OK button to confirm.
5. The appliance returns to setting
mode and the message CHOOSE
PROGRAMME is displayed.
• If a delay start is cancelled also the
washing programme has been can-
celled.
• If a new washing programme is set,
check that there is detergent in the
detergent dispenser.
Interrupt a washing programme in
progress
• Open the dishwasher door; the pro-
gramme will stop. The message
PLEASE CLOSE DOOR is dis-
played.