Multitab Function - Electrolux ESL68040 User Manual

22 electrolux multitab function

Multitab function

This appliance is equipped with the Mul-
titab function, that allows the use of
combi detergent tablets.
These products are detergents with a
combined cleaning, rinsing and salt
functions. They can also contain other
different agents depending on which
kind of tablets you choose ("3 in 1", "4 in
1", "5 in 1" etc...).
Check whether these detergents are
suitable for your water hardness. See
the manufacturers instructions.
Once this function is selected it will re-
main active for all following wash pro-
grammes.
With the selection of this function the in-
flow of rinse aid and salt from each re-
spective supply container is
automatically deactivated and also the
displayed messages for salt and rinse
aid are deactivated.
When using this function, the cycle du-
rations may change. If this is the case,
the running time for the programme is
automatically updated in the display.
Once the programme is running, the
setting can NO longer be changed. If
you want to cancel the Multitab
function you have to cancel the pro-
gramme setting and then deactivate
the function. In this case you have to
set a washing programme again.
If the drying results are not
satisfactory we suggest that you:
1. Fill up the rinse aid dispenser
with rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to posi-
tion 2.
If you decide to revert back to the
use of individual detergents we ad-
vise that you:
1. Deactivate the Multitab function.
2. Fill up the dispensers for salt and
rinse aid again.
3. Adjust the water hardness set-
ting to the highest setting and
perform 1 normal washing pro-
gramme without loading any
dishes.
4. Adjust the water hardness set-
ting according to the hardness of
the water in your area.
5. Adjust the rinse aid dosage.