Use Of Rinse Aid - Electrolux ESL68040 User Manual

14 electrolux use of rinse aid
4. Replace the cap making sure that
there is no trace of salt on the screw
thread or on the gasket.
5. Replace the cap tightly turning it
clockwise until it stops with a click.
Do not worry if water overflows from
the unit when filling with salt, this is
quite normal.
The salt container will require topping up
periodically.
You are reminded of this by a displayed
message REFILL SALT .

Use of rinse aid

Only use branded rinse aid for dish-
washers.
Never fill the rinse aid dispenser with
any other substances (e.g.
dishwasher cleaning agent, liquid
detergent). This would damage the
appliance.
Rinse aid ensures thorough rinsing,
and spot and streak free drying.
Rinse aid is automatically added
during the last rinse.
1. Open the container by pressing the
release button (A).
This occurs only at the start and at the
end of the washing programme; during
the running of the programme the indi-
cation for salt refilling is not active.
The refilling salt message can re-
main visible for 2-6 hours after the
salt has been replenished, assuming
the dishwasher remains switched
on. If you are using salt that takes
longer to dissolve then this can take
longer. The operation of the ma-
chine is not affected.
2. Add the rinse aid in the container.
The maximum level for filling is indi-
cated by "max".