Electrolux EI24EW25KS User Manual page 6

6 electrolux
1.
Push the Selection button (refer to sec-
tion "Clock function") again and again
until the function indicator Time of day
flashes.
2. Use the + / - knob to set the time.
After approx. 5 seconds, the flashing
stops and the display shows the time of
day set. The appliance is now ready to
use.
For time change you must not set a
clock function ( Minute Minder, Dura-
tion or End) or an oven function at the
same time. Make sure that the child
safety device is not set.
To use the oven, push the retractable
knob. The knob then comes out.
Switch the oven on
Turn the oven functions selector to a oven
function. The power indicator comes on.
The temperature display shows the sugges-
ted temperature for the oven function set.
The oven starts to heat up. When the tem-
perature is reached, an acoustic signal
sounds.
Changing the oven temperature
Turn the + / - knob to raise or lower tem-
perature. The setting changes in 5°C steps.
Controlling the temperature
Push Rapid heat up and Selection buttons
at the same time (refer to section "Clock
function"). The temperature display shows
the current oven temperature.
Switching the oven off
Turn the oven functions selector to the OFF
position.
Cooling fan
When the appliance operates, the cooling
fan switches on automatically. If you switch
off the appliance, the cooling fan continues
to operate until the appliance cools down.
Heat- up indicator
If you switch on an oven function, the bars
on the display come on one by one. The
bars show that the oven temperature in-
creases.
Residual heat indicator
When you switch off the oven, the bars on
the display show the residual heat.
Rapid heat up
With the additional function Rapid heat up
you decrease the pre-heating time.
Important! Do not put the food into the
oven, until Rapid heat up is completed and
the oven operates in the desired function.
1. Set an oven function.
2. Push the Rapid heat up button. The
bars next to the symbol
When the bars flash one by one, it
shows that Rapid heat up operates.
When Rapid heat up is completed:
– the bars of the heat indicator come
up,
– the bars next to the symbol
out,
– an acoustic signal sounds.
The oven now continues to heat ac-
cording to the pre-set oven function
and temperature. Now you can put the
food in the oven.
come up.
go