Table of Contents
Advertisement
Activating/deactivating the acoustic signal
The acoustic signal can indicate acoustically:
– at which water hardness the water softener is
set.
– when a dishwashing cycle has finished.
– when an error has occurred with the dish-
washer.
You can switch on/off the acoustic signal in the follow-
ing way:
1. Press the ON/OFF button.
If the only LED indicator illuminated is one
3
that belongs to a programme button, this
means that this dishwashing cycle has been
activated. The dishwashing cycle must be
deselected:
Press function buttons 2 and 3 simultane-
ously for approx. 2 seconds.
The LED indicators of all the programme but-
tons that can be selected light up.
2. Press function buttons 2 and 3 simultaneously
and keep them pressed.
The LED indicators for function buttons 1 to 3 will
flash.
3. Press function button 3.
The LED indicator for function button 3 will flash.
w
The
display will indicate the current setting:
w
The
display is
continuously illumi-
nated:
w
The
indicator is
not flashing:
4. Pressing function button 3 will change the setting.
w
5. Once the
display is indicating the required set-
ting, press the ON/OFF button. The setting is now
saved.
14
Acoustic signal activated
(ex-factory setting)
Acoustic signal deactivated
Hide quick links:
Advertisement
Table of Contents
