Rinse Aid; Activating/Deactivating The Inflow Of Rinse Aid - Electrolux ESF 6250 User Instructions

RINSE AID

Rinse aid ensures that your dishes gleam and are
free from spots, and that your glasses are clear.
Rinse aid can be added in one of two
ways:
• If you are using dishwasher detergent that already
contains rinse aid, the detergent including the
rinse aid is put into the detergent compartment.
– In this case the dispensing of rinse aid from the
supply container must be deactivated to avoid
a double dosage.
• If you are using dishwasher detergent and rinse
aid separately, the rinse aid is to be put into the
rinse aid supply container.
– In this case the dispensing of rinse aid from the
supply container must be activated.
– The amount of rinse aid to be dispensed must
be set.
Use only branded rinse aid for dishwashers.
1
Never fill the rinse aid container with any
another substance (e.g. concentrated vine-
gar) or dishwasher cleaning agent. This
would damage the appliance.
Activating/deactivating the inflow
of rinse aid
Some appliances are equipped with an addi-
3
tional 3 in 1 function.
If you use 3-in-1 dishwashing tablets and
select the 3 in 1 function together with the
dishwashing cycle, the inflow of rinse aid
does not have to be deactivated (see "3 in 1
function").
1. Press the ON/OFF button.
The LED in the ON/OFF button will become illumi-
nated.
If other indicators are also illuminated, this
3
means that a dishwashing cycle has been
activated. The dishwashing cycle must be
deselected (RESET):
Press function buttons 1 and 2 simultane-
ously for approx. 2 seconds.
All other indicators will go out.
2. Press the function buttons 1 and 2 simultaneously
and keep them pressed.
The LED indicators in function buttons 1 to 3 will
flash.
3. Press function button 2.
The LED indicator for function button 2 will flash.
The multi-display will indicate the current setting:
0 d
Inflow of rinse aid is deactivated
Rinse aid inflow activated
1 d
4. Pressing function button 2 activates and deacti-
vates the rinse aid dispensing function.
5. Once the multi-display is indicating the required
setting, press the ON/OFF button. The setting is
now saved.
(ex-factory setting)
13