Electrolux ESL 6225 User Instructions page 10

Setting electronically:
5. Press the ON/OFF button.
If the only LED indicator illuminated is one
3
that belongs to a programme button, this
means that this dishwashing cycle has been
activated. The dishwashing cycle must be
deselected:
Press function buttons 2 and 3 simultane-
ously for approx. 2 seconds.
The LED indicators of all the programme but-
tons that can be selected light up.
6. Press function buttons 2 and 3 simultaneously
and keep them pressed.
The LED indicators for function buttons 1 to 3 will
flash.
7. Press function button 1.
The LED indicator for function button 1 will flash.
The LED indicator for the end of the dishwashing
cycle is flashing and acoustic signals can be
heard simultaneously (only when the acoustic sig-
nal has been activated):
– The number of times that the LED indicator for
the end of the cycle flashes and the number of
acoustic signals correspond to the new hard-
ness setting.
– This sequence of flashes and acoustic signals
is repeated over and over, with a 5 second
pause in between.
8. Pressing function button 1 increases the hardness
setting by 1.
(Exception: hardness setting 1 follows hardness
setting 10).
9. When the hardness setting is correct, press the
ON/OFF switch.
The hardness setting is now saved.
10