Table of Contents
Advertisement
Horizontal Placement
Do not discard the stand. the label with your Drive's Model and Serial numbers
may be affixed to the underside of the stand (it may also be affixed to the back
of the Drive). In the event that you need warranty service, you will need to send
us the stand along with the Drive itself.
Removing the stand
Use a screw driver with the proper type and size head to loosen
the two screws located on the underside of the stand. Loosen
the screws just enough so that you can easily slide the stand out
of the groove. Keep the nuts attached to the screws. Store the
stand in a safe place.
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the EXTERNAL E5 HARD DRIVE USB 2.0 and is the answer not in the manual?
Questions and answers