Mounting; Orientation; Rigging - Chauvet Gobo Zoom LED 2.0 User Manual

Mounting

Orientation

Rigging

Gobo Zoom LED 2.0 (Rev. 3)
The Gobo Zoom™ LED 2.0 may be mounted in any position, provided there is
adequate room for ventilation.
Be sure that the structure can support the weight of the product. Please see the
"Technical Specifications" section of this manual for a detailed weight listing. Mount
the product securely. This may be done with a screw, nut and bolt, or a hanging
clamp. The hole in each bracket is 13 mm in size. When rigging consider routine
maintenance and control panel access. Please see the following notes on installation.
•
When aiming the products, you may use the bracket adjustment knob.
Loosen the knob, adjust to the desired angle, and then tighten the knob by
turning clockwise. Do not use tools for this step, as it may cause damage.
•
Safety cables must always be used.
Mounting
bracket
Do not use a tool on
the bracket
adjustment knob
Page 7 of 12