Fuse Replacement - Chauvet EZpar 64 RGBA User Manual

Fuse
Replacement
Page 8 of 20
Disconnect the product from power before replacing the fuse.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder.
5. Replace with a fuse of the exact same type and rating.
6. Insert the fuse holder back in place and reconnect power.
Spare fuse holder
(inside safety cap)
A spare fuse is not included; however, the safety cap has room for a spare.
Installed fuse
(held by plastic clip)
Safety cap
EZpar™ 64 RGBA User Manual