Table of Contents
Advertisement
What to do if ...
Fault
Hotplates not working.
The oven does not heat.
"F2" appears in the display.
The oven light does not come on.
If you cannot remove the fault with the remedies
described above, please contact your local dealer
or Customer Service.
1
Caution: repairs should only be undertaken by
specialised repair technicians.
repairs may result in serious injury to the user.
In the event of damage caused by inappropriate re-
pairs, the guarantee may not cover the work carried
out by
Customer Service or your dealer's repair
technicians.
3
Advice on cookers with metal
fronts:
Because of the cold surface at the front of the
cooker, opening the oven door during (or just
after) baking or roasting may cause the glass
to steam up.
32
Possible Cause
The hotplate concerned has not
been switched on.
A domestic electrical protection de-
vice has been tripped (or the fuse
has blown).
The oven has not been switched
on.
The required settings have not
been made.
The domestic electrical protection
device (fuse) has been tripped.
The meat probe plug is not fitted
properly into the socket.
The bulb has blown.
Inappropriate
Remedy
Switch on the hotplate concerned.
Check the fuse or protection de-
vice.
Switch the oven on.
Check the settings.
Check the protective devices.
If these are tripped repeatedly, you
should call a qualified electrician.
Insert the meat probe plug as far as
it will go into the socket on the side
wall of the oven.
Replace the bulb.
Advertisement
Table of Contents
