Page 1
HDTV Switcher U S E R M A N U A L www.gefen.com...
Page 2
6265 Variel Ave. Woodland Hills, CA 91367-9897 Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. HDTV Switcher is a trademark of Gefen Inc.
Introduction Features Panel Desciptions Connecting and Operating the HDTV Switcher RMT2-IR Installation IR Code Confl icts IR-Extender Installation Specifi cations Warranty TABLE OF CONTENTS...
Our Commitment Gefen will always offer the fi nest quality product at the best possible price. Included in that price is a lifetime of support from a team of outstanding engineers. The ex•tend•it HDTV Switcher allows two HDTV DVI devices to be switched easily in to one HDTV DVI compatible monitor or projector.
• Supports DDWG standard for DVI compliant monitors • Supports HDCP compliant devices • Optional RMT-2 remote control • DVI cables are used to connect the DVI inputs and HDTV Switcher output • Installs in seconds Includes: 2x 6’ DVI-D cables (m-m)
2 Connect the cable from your display (monitor or projector) into the DVI Out of the HDTV Switcher. 3 Connect the 5VDC power supply into the HDTV Switcher. 4 If any pixels are present on the video on either input, adjust the EQ associated with the particular input with the pixels.
Note: The RMT2-IR ships with two batteries. One battery is required for operation, the second battery is complimentary. RMT2-IR Installation The optional IR extender allows you to re- locate your HDTV switcher and still have IR control of the HDTV Switcher...
There are matching pairs of dip switches underneath the Switcher unit and under the remote battery cover. Switch 1 & 2 on the Remote and Switch 3 & 4 underneath the unit are the matching switches. These switches need to be matched for the remote to communicate with the switcher.
IR Extender Installation How to Connect the IR Extender 1 Plug the IR extender into the Remote port on the front of the Switcher Unit 2 Flip the Dip Switch 1 underneath the unit to the ON position...
SPECIFICATIONS Video Amplifi er Bandwidth ... 1.65 Gbps Input Video Signal ... 1.2 volts p-p Input DDC Signal ... 5 volts p-p (TTL) Single Link Range ... 1920 x 1200 DVI Input/Output Connector Type ... DVI-I (29 pin) female (digital only) Power Consumption ...
If equipment fails because of such defects and Gefen Inc. is notifi ed within one (1) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...