Table of Contents
Advertisement
EnGlisH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
[MENU]
34
Firmware Update
• In order to update the firmware, the environment and settings
BUTTON
required for connecting to broadband internet are needed
<BUTTON>
(vpage 7).
[BUTTON]
• Perform the firmware update operation after at least 2 minutes has
elapsed since turning this unit's power ON.
1
[MENU]
Press
ui p
Turns on the Menu settings mode and the Menu appears on
the display (vpage 28 "Menu map").
2
ui
Use
to select "Other" – "Firmware Update",
then press
<1/3 ENTER>
Check for Update
Start
• If updating fails, the set automatically retries, but if updating is still
not possible, one of the messages shown below is displayed. If
the display reads as shown below, check the settings and network
environment, then update again.
Display
Updating fail
Login failed
Server is busy
Connection fail
Download fail
[ENTER]
ui p
.
[ENTER]
,
<
/
ENTER>
or
p
.
1
3
Check for firmware updates. You can also check
approximately how long it will take to complete
an update.
Execute the update process.
Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure in connecting to server.
Downloading of the firmware has failed.
Setting the others [Other]
Add New Feature
• In order to add new functions, the environment and settings required
for connecting to broadband internet are needed (vpage 7).
• Perform the add new feature operation after at least 2 minutes has
elapsed since turning this unit's power on.
1
[MENU]
Press
.
Turns on the Menu settings mode and the Menu appears on
the display (vpage 28 "Menu map").
2
Use
ui
to select "Other" – "Add New Feature",
[ENTER]
<
/
ENTER>
then press
,
1
3
Execute the upgrade process.
Start Upgrade
• If the upgrade is not successful, an error message identical to those
in "Firmware Update"(vpage 34) will appear on the display.
Check the settings and network environment, then update again.
Display a list of the additional functions provided
Upgrade Status
by the upgrade.
The ID number shown on this screen is needed
Upgrade ID
when carrying out the procedure.
See the D&M Professional website for details about updates.
When the procedure is complete, "Registered" is displayed and
updates can be carried out. If the procedure has not been carried
out, "Not Registered" is displayed.
p
or
.
Advertisement
Table of Contents
