Table of Contents
Advertisement
[Notes concerning use of "Firmware Update" and
"Add New Feature"]
• Do not turn off the power until updating or upgrading is completed.
• Even with a broadband connection to the Internet, approximately
20 minutes is required for the updating/upgrading procedure to be
completed.
• Once updating/upgrade starts, normal operations on this unit cannot
be performed until updating/upgrading is completed.
• Furthermore, updating/upgrading the firmware may reset the backup
data for the parameters, etc. set for this unit.
• If the update or upgrade fails, remove and re-insert the power cord.
"Update Retry" appears on the display and update restarts from
the point at which update failed. If the error continues despite this,
check the network environment.
• Information regarding the "Firmware Update" function and "Add
New Feature" will be announced on the D&M Professional web site
each time related plans are defined.
• When usable new firmware is released with "Firmware Update"
or "Add New Feature", a notification message is displayed on
the menu screen. When you do not want to be notified, set
"Update Notification" (vpage 31) and "Upgrade Notification"
(vpage 31) to "Off".
See the illustration on the previous page for details of the buttons used for the operations on this page.
Setting the others [Other]
Language
Sets the language for display the menu.
• The factory language setting is "English".
1
Press
[MENU]
.
Turns on the Menu settings mode and the Menu appears on
the display (vpage 28 "Menu map").
2
ui
Use
to select "Other" – "Language", then press
[ENTER]
,
<
/
ENTER>
or
p
.
1
3
English / Deutsch / Français / Italiano / Spanish
EnGlisH
35
Advertisement
Table of Contents
