Digital connections
Connect digital devices such as AV receivers and D/A converters with
the unit to enjoy digital audio output from the unit.
When connecting, use a commercially available optical cable.
Cables used for connections
Audio cable (sold separately)
Optical cable
AV receivers /
D/A converters
OPTICAL
IN
When connecting the optical digital output connector
with an optical transmission cable (sold separately)
Match the shapes
Match the shapes then insert firmly.
Audio connections
Connecting headphones
Connect the headphones to the headphone jack (PHONES).
When you press the headphone/front speaker volume adjustment
switch (LEVEL), the switch will spring out. After adjusting the volume,
press the switch back in again.
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
Connecting an External control
device
Connect an external control device or other device for servicing.
(Use a RS-232C straight cable with a 9-pin D-sub connector for the
connection.)
RS-232C control allows you to perform external control from the host.
For details on RS232C control, see "RS-232C control" (vpage 40).
External control device
EnGlisH
5