Indoor Units Display; Function Display; Setting Menu - Fujitsu UTY-DMMUM Operating Manual

4-1-2. Indoor units display

Monitor
Room 1
Room 4
Cool Room 7
All
Min.heat Economy
Menu
Operation
Connected indoor units (Room X) are displayed. Operating
indoor unit is highlighted. For setting operation/stop of the
indoor units, refer to [6. OPERATION SETTING].
Room 1
Indoor unit under stop
Notice
• The indoor unit is set the ON timer
by wireless remote controller, the
indoor unit is displayed under
operation. At that time, the set
of the ON timer will be canceled
when the indoor unit is turned off
from Central remote controller.
• The indoor unit displayed like the
right is set from the indoor unit and
outdoor unit to the remote control
prohibition. In this case, operation
and setting cannot be made by
the Central remote controller.
• A blinking indoor unit means an
incorrect combination of operating
mode is set. For details refer to
[6-3-2. Operation mode setting].
• When an error displays alternately,
there is an error with an indoor
unit. Check the error display on
the indoor unit or the standard
remote controller and contact an
authorized service person.
En-9
9380221005_en.indd 9
Mo 10:00AM
Room 2 Room 3
Room 5 Room 6
Room 8
All O.U.
Low noise
Schedule RC prohibit
Function Schedule
Room 1
Indoor unit under operation
(or under minimum
heat operation)
Room 1
Room 1
Room 1
(Under operation)
Room 1
Room 1
Error

4-1-3. Function display

Monitor
Room 1
Room 4
Cool Room 7
All All
Min.heat Economy Low noise
Menu
Operation
Function
The effective set-up functions are displayed with signs. Not
set or invalid settings are not displayed. For details of func-
tions for setting methods, refer to the description in each item.
All Min.heat
O.U. Low noise
Refer to [7. FUNCTION SETTING]
RC prohibit
Refer to [9. SUBMENU SETTING]

4-1-4. Setting menu

Monitor
Room 1
Room 4
Cool Room 7
All All
Min.heat Economy Low noise
Menu
Operation
Function
This is the menu to set the operation or each function. Se-
lected the item with [Cursor button (Left/Right)] and press
the [Enter button], it switches to the operation screen of each
menu.
Operation
Settings relating to the operation can be made.
Refer to [6. OPERATION SETTING].
Function
Settings relating to the function can be made.
Refer to [7. FUNCTION SETTING].
Schedule
Setting of pattern for a scheduled operation can be
made.
Refer to [8. SCHEDULE SETTING].
Mo 10:00AM
Room 2 Room 3
Room 5 Room 6
Room 8
O.U.
Schedule RC prohibit
Schedule
All Economy
Schedule
Mo 10:00AM
Room 2 Room 3
Room 5 Room 6
Room 8
O.U.
Schedule RC prohibit
Schedule
8/11/2010 11:55:18 AM