Outdoor Unit Low Noise Operation Setting - Fujitsu UTY-DMMUM Operating Manual

7-3-3. Outdoor unit low noise operation
setting
Select "O.U. low noise" with the [Cursor button (Up/
1
Down)] and press the [Enter button].
Function
Min. heat (All)
Economy (All)
O.U. low noise
Schedule select
Back:
Operation
O.U. low noise screen is displayed. Select "O.U. low
2
noise" with the [Cursor button (Up/Down)] and press
the [Enter button].
O.U. low noise
O.U. low noise
Time setting
Start time
– – : – –
Back:
Since the setting items are highlighted, set "Enable"
3
with the [Cursor button (Up/Down)], and press the
[Enter button]. Reversed display of "O.U. low noise" is
released.
O.U. low noise
O.U. low noise
Time setting
Start time
– – : – –
Cancel:
Set a time for low noise operation. Select "Time setting"
4
with the [Cursor button (Up/Down)] and press the [Enter
button].
O.U. low noise
O.U. low noise
Time setting
Start time
– – : – –
Back:
9380221005_en.indd 16
Mo 10:00AM
Disable
Disable
Disable
Schedule 1
Setting:
Schedule
Mo 10:00AM
Disable
Stop time
AM – – – : – –
AM
Setting:
Schedule select
Mo 10:00AM
Enable
Stop time
AM – – – : – –
AM
OK:
Schedule select
Mo 10:00AM
Enable
Stop time
– – : – –
AM –
AM
Setting:
Schedule select
"Hour" of "Start time" is highlighted. Set the "Hour" with
5
the [Cursor button (Up/down)].
O.U. low noise
O.U. low noise
Time setting
Start time
– – : – –
AM –
Cancel: OK:
Notice
Display of time is the same style as the setting. Refer to
[9. SUBMENU SETTING].
Select "Minute" with the [Cursor button (Left/Right)],
6
and set by the same procedure as "Hour".
(Setting can be made in unit for 5 minutes.)
O.U. low noise
O.U. low noise
Time setting
Start time
10: – –
PM –
Cancel: OK:
Set "Hour" and "Minute" for the "Stop time" continuously.
When ¿ xed by pressing the [Enter button], the indica-
7
tion of function is displayed in the upper part of the
screen.
O.U. low noise
O.U. low noise
Time setting
Start time
10 : 00
PM –
Back: Setting:
To set other items, select the item with the [Cursor but-
ton (Up/Down)].
To return to the "Function" screen, press the [Cancel
8
button].
To complete the setting, the display returns to the
"Monitor" screen when the [Menu button] is pressed.
Notice
• Set "Hour" and "Minute" together with "Start time"
and "Stop time". (It does not operate with an
incomplete setting.)
• Do not set the same time for the "Start time" and "Stop
time". (It does not operate.)
Mo 10:00AM
Enable
Stop time
– – : – –
AM
Schedule select
Mo 10:00AM
Enable
Stop time
– – : – –
AM
Schedule select
Mo 10:00AM
Enable
Stop time
7 : 00
AM
Schedule select
En-16
8/11/2010 11:55:18 AM