Prohibition Setting - Fujitsu UTY-DMMUM Operating Manual

11
9-5. R.C. prohibition setting
Select "R.C. prohibit" with the [Cursor button] and press
1
the [Enter button].
"R.C. Prohibition" screen is displayed.
Submenu
Date/Time
R.C. prohibit
Monitor:
Select indoor unit (Room X) or "All units" with the [Cursor
2
button (Up/Down)] and press the [Enter button].
When indoor units cannot be displayed in a screen, ope-
rate by referring to the gauge at the right edge.
R.C. prohibition R.C. prohibition R.C. prohibition
All units All units All units
Room 1 Room 1 Room 1
Room 2 Room 2 Room 2
Room 3 Room 3 Room 3
Room 4 Room 4 Room 4
Cancel: Cancel: Cancel:
Screen Screen Screen
As the setting item is highlighted, set "Permit" or "Pro-
3
hibit" with the [Cursor button (Up/Down)] and press the
[Enter button].
R.C. prohibition
All units
Room 1
Room 2
Room 3
Room 4
Cancel:
Screen
9380221005_en.indd 26
Mo 10:00AM
Screen
Initial
Setting:
Gauge
Mo 10:00AM Mo 10:00AM Mo 10:00AM
Permit Permit Permit
Permit Permit Permit
Permit Permit Permit
Permit Permit Permit
OK: OK: OK:
Initial Initial Initial
Mo 10:00AM
Prohibit
Permit
Permit
Permit
Permit
OK:
Initial
Reversed display is released when the [Enter button] is
4
pressed.
(If set to "All units", the same setting is displayed in
each indoor unit).
When setting other indoor units, repeat the same pro-
cedure.
When [Cancel button] is pressed, the display returns to
5
the "Submenu" screen.
In addition, if the [Menu button] is pressed, the display
returns to the "Monitor" screen.
En-26
8/11/2010 11:55:20 AM