Clearing Gas Exposures; Gas Alarm Setpoints; Viewing The Alarm Setpoints - Honeywell GasAlertMicro 5 User Manual

Clearing Gas Exposures

The exposures automatically clear after 5 minutes when the detector
is deactivated.
To clear the MAX, TWA, and STEL exposure readings immediately,
press and hold C and G simultaneously. The detector displays the
following screen during the countdown.
Hold C and G for the entire countdown, otherwise the MAX,
TWA, and STEL exposure readings will not clear.

Gas Alarm Setpoints

The gas alarm setpoints trigger the gas alarms and are described in
Table 9..
Note
Table 9. Gas Alarm Setpoints
Alarm
Low alarm
High alarm
TWA alarm
STEL alarm
Downscale alarm
Multi alarm

Viewing the Alarm Setpoints

To view the current alarm setpoints for all of the sensors, press G
during normal operation.
GasAlertMicro 5/PID/IR
Condition
Toxics and combustibles: Ambient
gas level above low alarm setpoint.
Oxygen: Ambient gas level may be
set above or below 20.9%.
Toxics and combustibles: Ambient
gas level above high alarm setpoint.
Oxygen: Ambient gas level may be
set above or below 20.9%.
Toxic only: Accumulated value above
the TWA alarm setpoint.
Toxic only: Accumulated value above
the STEL alarm setpoint.
Toxic: If sensor reading is negative
(half of the TWA setpoint).
LEL: If sensor reading is negative
(half of the low alarm setpoint).
Two or more gas alarm conditions.
Alarms
41