Alarms - Honeywell GasAlertMicro 5 User Manual

Alarms

The following table describes the detector alarms and corresponding screens.
• During an alarm condition, the detector activates the backlight and displays the current ambient gas reading.
• If more than one type or level of alarm exists simultaneously, a multi alarm results.
• To change the factory-set alarm setpoints, refer to
Alarms
Low Alarm
• Fast beep
• Slow flash
L
• and gas type flash
• Vibrator alarm activates
High Alarm
• Constant beep
• Fast flash
L
• and gas type flash
• Vibrator alarm activates
Calibration and Setting Alarm
Table 7. Alarms
Screen`
TWA Alarm
• Fast beep
• Slow flash
L
•
• Vibrator alarm activates
STEL Alarm
• Constant beep
• Fast flash
L
•
• Vibrator alarm activates
Setpoints.
Alarms
and gas type flash
and gas type flash
GasAlertMicro 5/PID/IR
Alarms
Screen
37