Table of Contents
Advertisement
electrolux 21
The replacement of electric cable must be carried out
exclusively by the service force centre or by personnel with
similar competencies, in accordance with the current regu-
lations.
Permanent Connection
In the case of a permanent connection, it is necessary that you install a
double pole switch between the hob and the electricity supply (mains),
with a minimum gap of 3 mm between the switch contacts and of a type
suitable for the required load in compliance with the current electric
regulations.
The switch must not break the yellow and green earth cable at any point.
Ensure that the hob supply cord does not come into contact with
surfaces with temperatures higher than 50 deg. C.
Advertisement
Table of Contents
