Fitting The Hob Into The Worktop; Electrical Connections; Permanent Connection - Electrolux EHG 682 Instruction Booklet

Fitting the Hob into the worktop

F

Electrical connections

THIS HOB MUST BE EARTHED.
The manufacturer declines any liability should these
safety measures not be observed.
This hob is designed to be connected to a 230-240V
50Hz AC electrical supply.
F
10
FO 0199
a) Sealing gasket
A cut off plug inserted into a 13 amp socket
is a serious safety (shock) hazard. Ensure
that the cut off plug is disposed of safely.

Permanent Connection

Ensure that the hob supply cord does not
come into contact with surfaces with
temperatures higher than 50 deg. C.
Supply cable replacement
Min. size Cable/flex
0.75 mm
2
FO 0390
a
Cable / flex type Fuse
H05 V2V2-F (T90) 3 A