Permanent Connection - Electrolux EHG 75932 Instruction Booklet

Electrolux gas hob
Hide thumbs


Table of Contents
The replacement of electric cable must be carried out ex-
clusively by the service force centre or by personnel with
similar competencies, in accordance with the current regu-

Permanent Connection

In the case of a permanent connection, it is necessary that you install a
double pole switch between the hob and the electricity supply (mains),
with a minimum gap of 3 mm between the switch contacts and of a type
suitable for the required load in compliance with the current electric
The switch must not break the yellow and green earth cable at any point.
Ensure that the hob supply cord does not come into contact
with surfaces with temperatures higher than 50 deg. C.
electrolux 21


Table of Contents

  Related Manuals for Electrolux EHG 75932

This manual is also suitable for:

Ehg 90932

Table of Contents